|
TVS 50
can only be connected to ports 7 and 8 or
ports 15 & 16
If
using 15 & 16, you must use the 3 X 8
Expansion Card not the 0x8
PHONE
SYSTEM
-
Program 998. Make
sure Y581A or higher
-
Program 130, to
enable jacks 7 and 8 or Program 131 to
enable jacks 15 & 16
-
These programs (130
or 131) automatically set EXG, Hunt
Group, Hunting Type, and Voice Mail
Port. Jacks are automatically set for
Data Line Security
-
Set time on 624
system
-
Program 109. set
extension numbers as 165 and 166
(Optional but recommended, you can leave
as 107/108 or 115/116)
-
Restrict voice mail port 7 & 8 or 15 & 16.
-
Connect to
appropriate jacks, using 4-wire cord.
-
Set CO lines to
NORMAL (Programs 414, 415, 416). If you
set a line as DIL it will go directly to
voice mail and not ring at any other
station (you may want this at night).
-
Set Ringing
(Programs 408, 409, 410)
-
Set Delayed ringing
to give the user time to answer the call
before the VPS connects. (Programs 411,
412, 413)
-
Turn off the KX-TA
624
VOICE MAIL
PROGRAMMING (you need laptop with
communications software)
-
Connect laptop and
start communication software
-
Set Dipswitches to
position 5 (1 Left, 2 Right, 3 Left, 4
Right)
-
Plug in TVS 50 and
wait for system initialization “System
Administration” on screen
-
Start up Completed.
Connection is made when system light
stops flashing and **ON LINE MODE **
is displayed
-
Go to System
Administration Top Menu and do Quick
Setup and follow automatic Configuration
Instructions. Set up or delete
mailboxes here.
-
TEST: Press
Intercom 165 and see if VPS answers.
-
Set Dipswitch
position to 0 (All switches to the
Right)
-
Set up port service
for day and night. Recommendation:
INCOMING SERVICE should be custom 1 and
INCOMING CALL SERVICE PROMPT should be
User 1.
-
Set up COS 1,
especially AUTHORIZATION FOR MESSAGE
NOTIFICATION, & MWL NOTIFICATION FOR
UNRECEIVED MESSAGE. These should both
be set to YES
-
System
Administration Top Menu 1 5 7 3.
Message Waiting Lamp for every message
should be set to YES
|
